Description
The current reading displayed in the OSD appears to be frozen, staying at 0.8A, the drone was flown hard with expected current draw closer to the 20-40A range. It stayed frozen from boot up until the flight finished.
Steps to reproduce
- Power on the drone and goggles.
- Observe the current reading in the OSD.
- Increase throttle or fly the drone.
- Check whether the displayed current changes.
Expected behaviour
The OSD current reading should increase and decrease according to the throttle.
Actual behaviour
The displayed current remains frozen at 0.8 A, despite significant throttle and load changes.
Reproducibility
Can be reproduced with a powered drone on the bench with goggles.
Environment
- Flight controller: Foxeer F405V2
- Video system: DJI Goggles 3 with O4 AIR LITE
- Firmware commit: 370460b
- Firmware SHA: 518411839B96A47CDDC5DC24B76861BD1C720F8E9542B7F7EBC8D0BB366499BF
- Configuration: N/A
Description
The current reading displayed in the OSD appears to be frozen, staying at 0.8A, the drone was flown hard with expected current draw closer to the 20-40A range. It stayed frozen from boot up until the flight finished.
Steps to reproduce
Expected behaviour
The OSD current reading should increase and decrease according to the throttle.
Actual behaviour
The displayed current remains frozen at 0.8 A, despite significant throttle and load changes.
Reproducibility
Can be reproduced with a powered drone on the bench with goggles.
Environment