Myenergi ZAPPI / EPCube automation

[jacquesc1981-cyber]

Automation setup to set my EPCube battery to backup mode to charge EPCube battery when the Myenergi ZAPPI (car charger) sees output power CT >1000w for 1 minute. which works fine.

But then I want the reverse to happen when car stops charging, so I have automation set to monitor Myenergi ZAPPI (car charger) output power CT <1000w for 1 minute which I want to set EPCube mode back to "Time of Use" mode but there is no option for this, the only options I can get is autoconsumo or backup? any idea why I can't get the automation to see a "Time of Use" or "dinamique" mode to set to?

[Bobsilvio]

time of use requires specific configurations that are not currently supported.

[jacquesc1981-cyber]

Thanks for letting me know. 👍 Sent from Gmail Mobile

…

On Sat, 7 Feb 2026 at 09:15, Bobsilvio ***@***.***> wrote: *Bobsilvio* left a comment (Bobsilvio/epcube#16) <#16 (comment)> time of use requires specific configurations that are not currently supported. — Reply to this email directly, view it on GitHub <#16 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/B5NQQNKDD3XQFPC5HEFX3E34KWUKVAVCNFSM6AAAAACUILZWACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTQNRUGAYDQMBRGM> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[Bobsilvio]

Test new 1.3.1 and see Readme for automation.

[jacquesc1981-cyber]

Thanks for the update👍, I've updated it,and will play with it when i can get into home assistant again. Not sure what I have done but i can get into it on Iphone app but not on my PC. I'm still new to all this🫣

…

On Sat, 7 Feb 2026 at 18:56, Bobsilvio ***@***.***> wrote: *Bobsilvio* left a comment (Bobsilvio/epcube#16) <#16 (comment)> Test new 1.3.1 and see Readme for automation. — Reply to this email directly, view it on GitHub <#16 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/B5NQQNIQAUUEFYKUHWNJPXL4KYYM5AVCNFSM6AAAAACUILZWACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTQNRVGA4TSMBTGM> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[jacquesc1981-cyber]

can you change timings to half hourly e.g. 05:30 to 23:30 On Sun, 8 Feb 2026 at 11:10, Jacques Combrinck ***@***.***> wrote:

…

Thanks for the update👍, I've updated it,and will play with it when i can get into home assistant again. Not sure what I have done but i can get into it on Iphone app but not on my PC. I'm still new to all this🫣 On Sat, 7 Feb 2026 at 18:56, Bobsilvio ***@***.***> wrote: > *Bobsilvio* left a comment (Bobsilvio/epcube#16) > <#16 (comment)> > > Test new 1.3.1 and see Readme for automation. > > — > Reply to this email directly, view it on GitHub > <#16 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/B5NQQNIQAUUEFYKUHWNJPXL4KYYM5AVCNFSM6AAAAACUILZWACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTQNRVGA4TSMBTGM> > . > You are receiving this because you authored the thread.Message ID: > ***@***.***> >

[jacquesc1981-cyber]

The "allow charging via grid" also keeps switching to "off" when i run the automation. Will it be possible to ensure it stays switched ON On Sun, 8 Feb 2026 at 16:58, Jacques Combrinck ***@***.***> wrote:

…

can you change timings to half hourly e.g. 05:30 to 23:30 On Sun, 8 Feb 2026 at 11:10, Jacques Combrinck ***@***.***> wrote: > Thanks for the update👍, I've updated it,and will play with it when i can > get into home assistant again. > Not sure what I have done but i can get into it on Iphone app but not on > my PC. > I'm still new to all this🫣 > > > On Sat, 7 Feb 2026 at 18:56, Bobsilvio ***@***.***> wrote: > >> *Bobsilvio* left a comment (Bobsilvio/epcube#16) >> <#16 (comment)> >> >> Test new 1.3.1 and see Readme for automation. >> >> — >> Reply to this email directly, view it on GitHub >> <#16 (comment)>, >> or unsubscribe >> <https://github.com/notifications/unsubscribe-auth/B5NQQNIQAUUEFYKUHWNJPXL4KYYM5AVCNFSM6AAAAACUILZWACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTQNRVGA4TSMBTGM> >> . >> You are receiving this because you authored the thread.Message ID: >> ***@***.***> >> >